Mechanical Services
- Component / Part Installation: starts at $35 each
- Component overhaul (hub, headset, BB, etc): $100 each
- Wheel true: starts at $35 each
- Spoke replacement: starts at $35 each
- Wheel build: starts at $95 each
- Tubular tire installation: (glue & tape extra) $49 each
- Tubeless Tire Installation (tape & sealant extra) $35
- Flat Tire Repair: $20 plus parts
- Fork installation: $100
- Handlebar Tape Installation: $20
- Shoe / Cleat Plate Installation $20
- Wax chain: $60
- Post Purchase Garmin / Wahoo Computer set-up & Updates $25
- Bike fit: $250
- Bike Assembly
- Mechanical external routing: $300
- Mechanical internal routing: $350
- Mechanical with Hydraulic internal routing: $400
- Electronic with Mechanical internal routing: $440
- Electronic with Hydraulic internal routing: $480
- Pack bicycle to ship or travel: $120 (+ New cardboard box & packing materials $45 or bicycle bag – prices variable)
- All other services are charged at $120 per hour. Parts are extra
- The minimum labor charge for any mechanical work is $35.
- Pick up and delivery services are available in the Greater Toronto Area upon request. Price starts at $30.
Paint
- In the Mariposa Bicycles workshop, we specialize in painting carbon, steel, titanium and aluminum bicycles, not just our own handbuilt bicycles.
- Steel Titanium and Aluminum Frames: Chemically strip old paint, glass bead blast, paint one colour with primer, hand sanding clear coat, and hand polishing. (Deduct 15% from prices if item is stripped of old paint, clean and ready to repaint)
- Frame and fork: $799 ($639 USD) for one colour
- Frame only: $709 ($569 USD) for one colour
- Fork only: $199 ($159 USD) for one colour
- Clear coat only (polished or matte) frame and fork $259 ($209 USD)
- Carbon Frames:
- Frame and Fork: $919 ($739 USD) for one colour
- Frame only: $859 ($689 USD) for one colour
- Fork only: $269 ($219 USD) for one colour
- Clear coat only (polished or matte) frame and fork $299 ($239 USD)
- Additional frame colour (for all frame types)
- Head tube panel: $219
- Seat or down tube panel: $109 each or $169 for two
- Inside of fork blades: $159
- Inside of rear triangle: $159
- Multi-colour fade: $159
- Lug lining: $249
- Box lining: $339
- Pin striping: Starts at $139, depends upon complexity.
- Windows in lugs or crown: $69
- Pearlescents: $139
- Decals: Prices range between approximately $60-$150
- Decal application: $79 (includes clear coat)
- Stencil creation: $100 per hour
- Paint Components
- Stem with face plate: $149 for one colour
- Handlebar: $149 for one colour
- Handlebars and stem: $289 for one colour
- Seatpost: $149 for one colour
- Pump: Starts at $125 – Does not include the pump, but we have Silca Impero ($269.99), Silca Tattico ($99.99) Lezyne HP ($73) and other pumps available for purchase.
- Chrome or Copper Plating
- Please contact us for current rates.
- Chrome Masking (for new and existing chrome)
- Lugs $195 (seat, topeyes & head)
- Fork crown $100
- Front and rear dropout faces $70
- Dropout faces and front and rear edges $100
- Right chainstay $30
- Partial stays and fork blades $100
- Front derailleur hanger $25
- Other Services
- Rust proofing $50
- Strip paint $95
- Strip paint and sand blast $125
Restorations
With over 50 years of experience in frame repairs and over 60 in bicycle service we have the knowledge and stock of vintage and new parts to repair and restore almost any bicycle.
- Steel Frame Repair Pricelist:
- Replace top or down tube: $339
- Replace seat stay: from $259
- Replace chain stay: from $289
- Replace rear dropout (1): $179
- Replace head tube: $179
- Replace fork blade (1): $179
- Replace front triangle: from $509
- Frame Alignment:
- Rear alignment/spacing $50
- Fork alignment $50
- Chase and face bottom bracket $50
- Braze-ons:
- Gear lever bosses (pair) $60
- Bottle cage bosses (pair) $65
- Top tube cable tunnels (three) $65
- Top tube cable stops (pair) $60
- Low rider rack bosses (pair) $85
- Cantilever bosses (pair) $85
- Cantilever brake guide/bridge $80
- Move brake bridge: starts at $115
- Disk brake mount from $85
- Pump peg $40
- Front Derailleur Braze-on $40
- Mudguard eyelets (4) $115
- Add Disc Brake Mounts: $145 each
Handbuilt Wheels
In the Mariposa workshop we have over sixty years of experience building custom wheels. We hand build specialized wheels for road, gravel, randonneur, cyclocross, track, and city bicycles. Wheels are built to the highest specifications to meet the needs of the rider. We can accommodate many different sizes, materials and brand selections. For more on the merits of handbuilt wheels, read Peter Morse’s feature “Handbuilt Wheels”.
Shop wheels we currently have in stock.
For custom details and requests, please contact us at [email protected]
BOOK A SERVICE
All prices are in Canadian Dollars (CAD) unless otherwise noted.
Bicycle Specialties Ltd charges an hourly rate of $120 per hour to strip frames of components including headset & bottom bracket. All other services are charged at $120 per hour. Parts are extra. Drop-off, pick-up and/or delivery are the responsibility of the customer. Pack and ship handling fee for full build bicycles is $100, for frame only it is $50.
Located in Toronto, Ontario, Canada
Call us at 416-423-0456 or e-mail us at [email protected]